How To Dye Blonde Hair Black – smartesthairstyles.com – Dyeing your hair black is easy because you don’t have to worry about bleaching it first. Depending on the shade you choose, you can have a natural look or a gothic look. Getting the perfect shade can be difficult, but with the right technique, you can ensure your hair looks exactly how you want it.
- Selection and preparation of the dye
Choose a soft black if you want a natural look. A soft black looks more like a dark brown than a true black, especially when you’re holding a piece of black clothing next to it. However, as far as hair goes, “soft black” is still considered black and looks the most natural.
This is the safest color to start with. If you want your hair to be darker, you can always dye it darker later.
Try a jet black if you prefer a gothic look. Because it’s so dark, that black can look unnatural, especially if your skin is fair. Some deep blacks even contain tints of other colors like blue or purple. They appear pitch black under most lights, but can appear bluish or purple in sunlight.
If you are unsure how a color will look on you, go to a wig shop and try on some wigs in that color.
Include coloring agent and volume 10 developer if not using a box kit. If you bought your paint in a kit, it comes with everything you need: developer, paint, conditioner, gloves, etc. Otherwise, you will need a tube of paint and a bottle of 10 volume developer.
You should also get gloves, a coloring brush, and a non-metallic bowl.
Prepare your dye according to the directions if using a kit. Most stain kits come with instructions, but if you lost yours don’t worry, it’s pretty self-explanatory. Pour the color into the larger bottle with the developer. Close the developer bottle and then shake it to mix the color. Break or cut off the stopper at the top of the bottle.
If your hair is past your shoulders, it would be a good idea to prepare 2 boxes of hair dye. This will ensure you have enough to cover all of your hair.
Mix the paint and developer in a non-metal bowl if not using a kit. Pour enough 10 volume developer to saturate your hair into a non-metallic bowl. Add an equal amount of dye, then mix the two ingredients together with a non-metallic spoon or coloring brush. Keep stirring until the color is even and no streaks remain.
Plan on about 57g of developer. If you have very long or thick hair, you may want to use 4 oz developer instead.
It is important to use a bowl that is not made of metal, e.g. B. made of glass or plastic. Metal can react with the dye and change color.
Add a protein filler to the color if you have bleached hair. You need to apply protein filler because when you bleach your hair you strip it of pigment. This means if you try to dye your hair, the color may come out patchy or the wrong color. In some cases it can end greenish.
If you’ve never colored your hair before, you don’t need to apply protein filler.
Read the directions on the bottle to find out how much protein bulking agent to use. In most cases it will be half a bottle.
You can get a clear or tinted protein filler. A tinted protein filler gives you subtle undertones that may show up in your hair in sunlight.
- Applying the dye to your hair
Protect your skin, clothes and work surface from stains. Put on an old shirt that you don’t mind if it gets ruined, and then apply some petroleum jelly to the skin around your hairline. Put on latex or nitrile gloves, then cover your counter and floor with newspaper.
Better yet, wear a shirt with long sleeves to avoid staining your arms.
If you don’t want the shirt to get dirty, drape a hair dye cape around your shoulders. You can also use an old towel.
Divide your hair into 4 sections if it is long or thick. Part your hair horizontally at about ear level as if making a half up ponytail. Divide the top section of your hair in half, twist each half into a bun, and then secure the buns with hair ties or bobby pins. Next, also split the bottom section of your hair in half and then drape each half over each shoulder.
If you have medium length hair, you can simply part your hair in half like making a half up ponytail. Secure the half up ponytail with a hair clip or hair tie.
If you have short hair, there is no need to part your hair.
Apply color in 2.5-5.1 cm (1-2 inch) sections, starting at the roots. Start by picking one of the bottom sections, then section off a 1-2 inch section of hair from it. Dip a coloring brush into the color, then brush the color onto your hair, starting at the roots. Work your way down to the ends of your hair. Be sure to fully saturate each strand.
Alternatively, if your color came with an applicator bottle, press the color onto your roots and then work it through your hair with your fingers. Apply it to the rest of the hair shaft and then work it in. Be sure to wear gloves to avoid staining your skin!
Continue applying the paint in 1 to 2 inch increments. When you’re done with the first bottom section, move on to the second bottom section. After that, untie one of the knots at the top of your hair and apply the color to your hair in the same way. Finish with the last knot on the other side of your hair.
Make sure you apply the color liberally to your parting and hairline.
Alternatively, you can undo both buns and apply the color from your front hairline to the back of your parting.
Cover your hair with a shower cap and wait at least 20 minutes. Wearing a shower cap helps keep your surroundings clean, and it also traps your body heat, which aids in the processing of the dye. How long you have to wait for the paint to set depends on the brand of paint you’re using, so be sure to read the directions. In most cases you will have to wait around 20 minutes, but in some cases you may have to wait 45 minutes.
If you have very long hair, first twist it into a low bun and then secure it with a hair clip.
- Finishing hair color
Rinse the dye out with cold water. Tilt your head over a sink and rinse out the paint. Alternatively, you can undress and get in the shower. Rinse the dye out of your hair with cold water until the water runs clean.
Do not use shampoo, not even color-safe shampoo.
The water doesn’t have to be ice cold; it just has to be the coldest temperature you can stand.
Apply conditioner, then rinse with cold water. Choose a conditioner made for colored hair or a sulfate-free conditioner. Apply it to your hair and then wait 2 to 3 minutes. Rinse out the conditioner with cold water once the time is up.
Most staining kits include a conditioner. If yours doesn’t have conditioner, use a colored hair conditioner.
The conditioner is a must as it makes your hair nice and soft after the tough coloring process.
Allow your hair to air dry. Dyeing is a tough process for your hair, so it’s best to treat it as gently as possible. Air drying is the most gentle drying method. If you can’t let your hair air dry, apply heat protectant and use a blow dryer on a low setting.
Do not wash your hair again for 72 hours. This is very important as it gives your hair cuticle time to close and set the color. After the 72 hours are up, you can wash your hair with color-safe shampoo and conditioner.
- Maintaining the Color
Limit washing your hair to 2 to 3 times a week. The more often you wash your hair, the faster the color will fade. Instead, limit your hair to two or three times a week.
If your hair feels greasy, use some dry shampoo. Choose a dry shampoo that’s specially formulated for color-treated black hair or it will show.
Use cool water when washing your hair. Heat can cause color to fade, and since your hair was so light to begin with, any fading will be noticeable. That doesn’t mean you have to use freezing temperatures – just use the coldest water you can stand. Anything between cool and lukewarm should be fine.
Use shampoo and conditioner on colored hair. If you can’t find such products, use sulfate-free products instead. Most bottles will state whether or not they are sulfate-free on the front label, but it would still be a good idea to check the ingredients label on the back.
Sulfates are harsh detergents that not only can leave your hair feeling dry, but can also fade dyes.
Avoid clarifying or bulking shampoos. These shampoos open the hair cuticle, which allows the color to be flushed out more quickly.
Consider using a colour-depositing conditioner. You can buy one at the salon or make one yourself by putting some of your color in a bottle of white conditioner.
Limit heat styling and use heat protectant if you do. Heat styling includes things like hair dryers, straighteners, and curling irons. It is very harmful to your hair especially if you do it on a daily basis. Instead, let your hair air dry whenever possible and embrace your natural hair texture. If you blow dry, straighten or curl your hair, apply a heat protectant first.
Allow your hair to dry completely before using a flat iron or curling iron.
Consider non-heat curling and straightening methods.
Protect your hair from the sun to reduce fading. The easiest way to do this would be to cover your head with a hat, scarf, or hood. However, if you don’t like wearing these, consider using a UV protection spray instead. It’s like sunscreen except for hair. You can find it in cosmetic stores and hair salons.
Avoid exposing your hair to the pool and chlorinated water. Cover your hair with a swimming cap if you have to.
Touch up your roots every 3 to 4 weeks. When you dye dark hair a lighter color, visible roots don’t look as bad or unnatural—in some cases, they look like an ombre. However, if you dye blonde hair black, your exposed roots will look unnatural .
If you notice general fading, you can apply glaze to the rest of your hair. This refreshes the color without having to re-dye it.
Alternatively, you can darken your roots with black eyeshadow or a root cover-up kit.