How to Dye Buzzed Hair - smartesthairstyles.com - The buzzcut is a popular, low-maintenance style. If you want to give your cut a little more edge, consider dying it a different color. The benefit of coloring buzzed hair is that you can experiment with new colors every 1 to 2 months. There will be some damage but due to the length it won't be very noticeable - and you'll end up totaling it all back up 2 weeks later!
- How to bleach hair
Decide what color you want to dye your hair. This will determine whether or not you need to bleach it first. If you choose a shade darker than your own, you do not need to bleach your hair and you can proceed directly to coloring. However, if you choose a lighter shade, you must bleach first.
If you have light hair and want to dye it darker, click here to continue.
If your hair is blonde and you're dying it a cool color like purple or blue, it might be a good idea to tone your hair first. Click here to learn more.
Cover your skin, clothes and counter. Put on an old shirt that you don't mind getting dirty, then cover your shoulders with an old towel. Lay newspaper across your counter. If you want, you can also put on a pair of plastic dye gloves.
The bleach will be on your scalp anyway, so gloves aren't essential .
Mix 1 part bleach with 2 parts developer at 20 volumes. Get a pack of hair bleach and 20 volume developer. Measure out 1 part bleach and 2 parts developer at 20 volumes. Mix the two together in a non-metallic bowl using a non-metallic spoon.
Prepare enough bleach to saturate your hair.
Some bleach kits include a small scoop. Use that to measure the bleach and developer.
Apply a thin coat of bleach to your hair, then wait 15 minutes. If you wear gloves, you can apply the bleach with your hands. Alternatively, use a tint brush. Don't worry about being too meticulous here. Simply apply a thin, even coat of bleach, then wait 15 minutes. The goal is to cover as much hair as possible as quickly as possible.
This first layer of bleach ensures that your hair lightens evenly.
Cover your hair with a plastic shower cap to protect those around you.
If you have very light hair, you may only need to wait 5 to 10 minutes. Once you notice your hair getting lighter, you're ready for the second coat of bleach.
Apply more bleach and wait another 30 minutes. Do not rinse out the bleach. Just take off the shower cap (if you put it on earlier) and apply a thick, liberal coat of bleach. Use enough that you can't see a single strand of hair sticking out of the bleach. Wait up to 30 minutes for the bleach to process after you apply it.
Again, cover your hair with a plastic shower cap during the bleaching process.
If you have light-colored hair to begin with, you may not have to wait the full 30 minutes. If you like the lightness your hair achieves, you're done!
Wash off the bleach with cold water and shampoo. Rinse the bleach out with cold water first, and then use some shampoo. You haven't colored your hair yet, so you can use any type of shampoo you want. However, a mild, moisturizing shampoo would be best as it will leave your hair feeling nice and soft.
It's a good idea to use a purple or blue shampoo after bleaching your hair. This will help tone down any brassy, yellow, or orange tones that remain in your hair.
- How to tone hair
Determine if you need to tone your hair. Dye is translucent, so it only adds the color that's already there. Look at your hair and note the color. Is it silver, yellow or brass colored? Next, take a look at the color you're going to color it with. Does this color combine well with your current hair color? If not, you need toning! For example:
Warm colors, like warm pink and peach, already contain orange. So if your hair is going brassy, you don't need to tone it.
Cool colors like cool pink, purple and blue require a silver base. If your hair has turned brassy or yellow, you need to tone it.
Some colors mix well with yellow because they already contain yellow—like green or orange. In this case, you don't need to tone it.
Protect your skin, clothes and counter. The toner contains a small amount of dye that will help neutralize the yellow or orange tones in your hair. As such, it stains clothing, skin, and hair. Put on an old shirt that you don't mind getting dirty or drape an old towel around your shoulders. Cover your counter with newspaper and put on a pair of plastic coloring gloves.
There is no need to apply petroleum jelly to the skin around the hairline, ears and neck.
Mix your toner with volume 20 developer. Buy a bottle of toner and about 20 volumes of developer. Mix the two together according to the proportions recommended on the toner. As with bleaching and dyeing, use a non-metallic bowl and non-metallic spoon.
If you can't find toner, you can use a toning shampoo instead.
If you can't find either, add a small amount of purple dye to white conditioner instead.
Apply the toner to your hair. You can do this with your gloved hands or with a coloring brush. Be sure to apply the toner liberally to your hair, covering each strand. If you don't do this, your hair will not be toned evenly, which can lead to uneven coloring.
Cover your head with a plastic shower cap. This will help keep your environment clean in the next step.
Let the toner sit and then rinse it out. How long you have to wait depends on the type of toner you are using and the amount of toner you need. Expect a wait of around 10 to 15 minutes in most cases. Once the time is up, hop in the shower and wash off the toner with cold water.
Continue rinsing until the water runs clear. If necessary, use a sulfate-free shampoo for color-treated hair.
Repair any overtoned areas with bleach for 2 to 3 minutes. If you left the toner on for too long, your hair may turn purple. Unless you're dying your hair purple, you may want to fade those purple hues. Dry your hair completely first, then apply bleach to it. Leave it on for 2 to 3 minutes and then wash it off with shampoo.
Prepare your bleach using 1 part bleach and 2 parts 20 volume developer.
Apply the bleach with a coloring brush for more precision. You may not need to touch up all the hair.
Apply a deep penetrating mask for 30 minutes. While not strictly necessary, it will help make your hair nice and soft. If you plan on coloring your hair, you should hold off on the mask for now. However, if you're going to go silver or white, take a moment to apply a deep conditioning mask.
Make sure you use a sulfate-free mask. Check the ingredient label to be sure.
Cover your head with a plastic shower cap to make the mask more effective. You can use the same shower cap you used before, just make sure it's clean!
- How to hair color
Protect your skin, clothes and counter from stains. Put on an old shirt and drape an old towel over your shoulders. Cover your counter with newspaper and put on a pair of plastic coloring gloves. There's no need to apply petroleum jelly to your hairline, neck, or ears; it will only make the job messier.
It would be best if you wait 1 to 2 days before coloring your hair to minimize damage. However, since your hair is so short, the damage will not be very noticeable.
Prepare your dye if necessary. There are many different dyes available on the market. Most punk dyes are already mixed into the developer and ready to use right out of the jar. Other types of dyes must be mixed in a 20 volume developer. You can even use a coloring kit in a box.
If you have a pre-mixed color and it's too dark, mix a small amount of the color into the white conditioner. Use enough conditioner to saturate your hair.
Always prepare the paint in a non-metallic bowl. Use a non-metallic spoon to stir.
Apply the color to your hair with a coloring brush. Start at the top of your head and work your way backwards. Do your front hairline and sides next. When you reach your ears, pull them forward so you can get the hair behind them.
Use the edge of the brush to make your hairline. Don't worry if you get dye on your skin; it will come off.
Turn your back to the mirror and hold a smaller mirror in front of you so you can check your work in the back of your mind.
Cover your hair with a plastic shower cap and let it sit. How long you leave the dyeing process on depends on the type of dye you are using. Most pre-mixed punk dyes take 45 minutes, while packaged kits take only 20 minutes. Check the label or instructions that came with your dye.
The plastic shower cap isn't strictly necessary, but it will help keep your environment clean. It also traps your body heat, which helps the dyeing process more effectively.
Rinse the paint out with cold water and then apply a conditioner. Do not use shampoo as this may cause color fading. Simply rinse out the paint with cool to lukewarm water. Once the water runs clear, apply conditioner to your hair. Wait 2-3 minutes, then rinse out the conditioner.
Use a sulfate-free conditioner for colored hair. If you're using a color set, you may already have a pack of conditioner included.
Most of the color on your skin should have come out during the shower. If it doesn't, use a cotton ball dipped in alcohol-based makeup remover to wipe it off.
- How to care of hair
Trim your buzz cut every 2 weeks. At this length, even the slightest regrowth is obvious, requiring you to trim your hair more often than you normally would. Since you'll need to trim it often, it would be a good idea to invest in a trimmer and learn how to trim your own hair.
If your hair is slow growing, you may be able to leave 3-4 weeks between haircuts.
Touch up your color every 2 to 4 weeks. Even at this length, even the slightest regrowth will be visible. Unless you don't mind the look of the frosted tips, you'll have to repeat the entire coloring process on your hair. This includes bleaching and toning.
Bleaching damages your hair, but at this length it's not that noticeable. Also, you will eventually turn it off.
Cover your hair when you go outside. This not only prevents your color from fading, but also protects your scalp from sunburn. If you don't want to wear hats, try a hood or scarf instead. You can also apply some sunscreen or UV protection spray.
A hat, scarf, or hood is the best way to prevent color fading.
Wash your hair with cool water and color-safe products. This is key to keeping your color bright and vibrant. Wash your hair at the coldest temperature you can stand and be sure to use shampoo and conditioner formulated for color-treated hair.
Limit yourself to only washing your hair once or twice a week. If you need to wash your hair in between, stick with plain water.
If you can't find products for colored hair, use sulfate-free products instead. Sulfates are harsh detergents that can cause hair dye to fade.
Use a scalp cleansing shampoo when changing your hair color. When trimming your buzz cut, you'll likely trim off any colored parts and start with virgin hair. This is a perfect opportunity to wash your scalp with a scalp cleansing shampoo e.g. B. an anti-dandruff or a balancing shampoo for the scalp.
If possible, use sulfate-free shampoo; Sulfates can contribute to dryness.
Do not wash your hair with scalp cleansing shampoo while it is still colored as the shampoo can remove the color.
Consider exfoliating your hair during this time as well. This will help remove the dead skin cells from our scalp.